If you’re looking for a secure home this hurricane season, it’s wise to seek out hurricane fabric installers in Venice. Hurricane fabric is a lightweight and economical form of storm protection.
Additionally, hurricane fabric doesn’t attach permanently. So you don’t have to make a commitment to altering the look and feel of your home. But you won’t have to worry about complicated setup either. Once a hurricane fabric installer installs anchors, all you have to do is attach the fabric with screws.
Why Shouldn’t You Just Install Anchors Yourself?
It might seem pretty simple to install your own hurricane fabric anchors. However, there are a few things you want to keep in mind.
- Building code requirements for Venice
- The materials you will need
- An exit and entrance after the fabric is deployed
- Permits
So if you plan to D.I.Y your hurricane fabric anchors, it might end up being a bit more of a process than you expected. Luckily though, hurricane fabric installers know the in’s and out’s of hurricane fabric installation.
We already have permits, are aware, and will construct according to building codes in Venice, and have all the materials we need. Plus, with years of experience, there’s really no room for mistakes.
How To Deploy
- Lay out your AstroGuard fabric piece next to the appropriate window. There should be a number system given to you to indicate which portion of fabric goes where.
- You then want to remove the anchor screws, and you might need a step ladder to reach the top of your opening. Remember, always start at the top.
- Once you’ve removed the anchor screws, it’s time to install your fabric by hand tightening the screws through the clips.
- Your fabric might require a slight pull to attach to all sides. Although it’s normal for the material to seem a little loose.
How Does Hurricane Fabric Work?
That flexibility is part of the design, and we’ll explain why. Your hurricane fabric essentially works like a trampoline. It absorbs the impact of debris and “bounces” it back outward. Securing your home during the storm.
Maintenance
Since hurricane fabric installers don’t permanently install your fabric, it doesn’t require all that much maintenance. When the storm is over, simply clean your fabric off with water and mild dish soap. Make sure your fabric is completely dry before putting it into storage, though. Otherwise, it can mildew, creating a poor smell and unsightly stains. But this form of hurricane protection in Venice is generally easy to care for.
Hurricane Fabric Installers In Venice
West Shore Construction has served the Venice area since 1985. Our hurricane fabric installers are meticulous in the spacing of your clips to ensure we’re abiding by building codes.
If you decide you want to tackle a D.I.Y job, we will custom cut the panels and send you thorough instructions. You can check out our pricing here, visit us online, or give us a call at 727-488-8182 for any questions or to get ahold of a hurricane fabric installer from West Shore Construction.
